CHIEF PAC126 - Manual

I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8800-000059 Rev B
©2006 Chief Manufacturing
www.chiefmfg.com
01/06
BEFORE YOU BEGIN
Lateral Shift Accessory
Model: PAC-125/PAC-126
The PAC-125 Lateral Shift Accessory is for use with Chief Model PSM, PST, PRO, PLP, Large Flat Panel Display wall
mounts. It can be installed on either a 16" or 24" on-center stud systems, and includes seven mounting holes at 4"
intervals. The PAC-125 is also grooved for drilling at other intervals.
PAC-125 with mount (not included) installed.
CAUTION!
The instructions provided in this document outline the installation of the PAC-125 Lateral Shift Accessory to specific
Chief mounts. If you have questions regarding the use or installation of this accessory, contact a Chief Customer
Service representative at 1-800-582-6480 before proceeding with the installation.
CAUTION!
To prevent damage to the Kit, which could affect or void the Factory warranty, and to the equipment that will be
attached to it, thoroughly study all instructions and illustrations before you begin the installation.