CHIEF PAC717 User Manual
Page 6
PAC717
Installation Instructions
6
Figure 5
4.
Position shelf column mount (B) around lower extrusion of
cart/stand at desired mounting height. (See Figure 6)
5.
Raise shelf bracket and hook over shelf’s right stud. (See
Figure 6)
6.
Turn both knobs clockwise to tighten the shelf in place. (See
Figure 6)
Figure 6
Adjustments
Height Adjustment
1.
Loosen back bracket (D) by turning both knobs
counterclockwise. Do NOT remove knobs. (See Figure 7)
2.
Slide bracket to the left until it disengages from the right
stud. (See Figure 7)
Figure 7
3.
Let the bracket drop down and hang from the shelf’s left
stud. (See Figure 8)
4.
Adjust literature tray to desired height. (See Figure 8)
Figure 8
5.
Raise shelf bracket and hook over shelf’s right stud. (See
Figure 9)
6.
Turn both knobs clockwise to tighten the shelf in place. (See
Figure 9)
Knobs shown
removed for
viewing purposes
only
(D)
3
Knobs shown
removed for
viewing purposes
only
5
6
(C) x 2
2
(C) x 2
1
3
4