CHIEF NAV8B - Manual

I N S T A L L A T I O N I N S T R U C T I O N S
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8821-002006 Rev00
©2010 Milestone AV Technologies,
a Duchossois Group Company
09/10
NAV8B Vent Block Kit
The NAV8B vent block kit is designed for use with Chief® Raxxess
racks.
PARTS INCLUDED
INSTALLATION
1. Attach magnetic vent blocks (A) to the inside of the rack, as
required. (See Figure 1) Figure 1
®Chief is a registered trademark of Milestone AV Technologies.
All rights reserved.
A (8)
[Vent block]
(A)
(NE1F2023 shown with top panel removed for clarity)
(A)
DIMENSIONS
9.00
228.6
9.00
228.6
0.03
0.8