CHIEF NADBW User Manual
Nadbw document holder, Parts included installation
I N S T A L L A T I O N I N S T R U C T I O N S
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8821-002007 Rev01
©2011 Milestone AV Technologies,
a Duchossois Group Company
06/11
NADBW Document Holder
The NADBW document holder is designed for use with Chief®
Raxxess racks.
PARTS INCLUDED
INSTALLATION
1.
Remove paper from tape squares on back of NADBW. (See
Figure 1)
2.
Attach NADBW document holder to the rack.
Figure 1
®Chief is a registered trademark of Milestone AV Technologies.
All rights reserved.
A (1)
[Document holder]
x 4
12.50
317.5
8.22
208.8
1.28
32.5
2.03
51.6
4X VHB TAPE SQUARES
DIMENSIONS