CHIEF QMP1L - Manual (Page 7)

Installation Instructions QMP1L
7
Height Adjustable
1. Using 5/32" hex key (R), slightly loosen or tighten the
adjustment screw as necessary. (See Figure 12)
• If display settles on its own, rotate adjustment
screw counterclockwise (towards the "+" symbol).
• If display rises on its own, rotate adjustment
screw clockwise (towards the "-" symbol).
NOTE: It may be necessary to raise or lower the height
adjustable arm to expose the adjustment screw.
Figure 12
Laptop Tray Tension Adjustment
1. Using 3/16" hex key (S), slightly loosen or tighten the laptop
tray tension adjustment screw as necessary. (See Figure 13)
Figure 13
Height adjustment screw
1
1