Com-Power AH-220 User Manual

Horn antenna, Features, Application

Advertising
background image

Features

Frequency Range: 200 MHz to 2 GHz

High Power Handling

Transmit or receive capability

Three year warranty

Application

The AH-220 horn antenna was specifically designed

to make EMC measurements. This antenna is suit-

able for making EMC measurements per EN 61000-

4-3 and MIL-STD 461/462 test specifications.

The distinct advantage of the AH-220 horn antenna

is its high gain. This reduces necessary power re-

quirement for generating high field strengths for

immunity testing. High gain also increases antenna

sensitivity to low level signals during emissions

testing. The gain of this horn antenna is at least 4.6

dBi over the entire frequency range.

For immunity testing, the input power requirement

P in Watts to generate E Electric Field Strength in

V/m at a distance in D meters can be calculated by

using the following formula:

P = E

2

x D

2

/ 30 x Numeric Gain

G = 20 log F -29.79- AF

G =10 log (Numeric Gain)

Where

G = gain in dBi

F = Frequency in MHz

AF = antenna factor in dB

Description

The model AH-220 is a linearly polarized broad-

band double ridged horn antenna operating in the

frequency range of 200 MHz - 2000 MHz.

The AH-220 Horn antenna is an alternative to bi-

conicals and log periodic antennas operating in the

same frequency range for emissions and immunity

testing where high gain is needed and the large

size of the antenna is not an important factor. For

immunity measurements the AH-220 can accept

up to 800 Watts input power in a continuous mode.

For easier handling, the AH-220 is a constructed us-

ing light weight aluminum with a corrosion resistant

conductive coating. The mounting bases of Model

AH-220 are located near the antenna’s center of

gravity. Two mounting bases are provided for ver-

tical and horizontal polarizations. Each mounting

base has a 1/4 inch x 20 threaded hole. The antenna

can be purchased with an optional Com-Power an-

tenna tripod (Model AT-220) which has a mounting

head with a matching screw.

Each antenna is individually calibrated before ship-

ment. The test data will be shipped with the antenna.

Horn Antenna

AH-220

Com-Power Corporation

114 Olinda Drive, Brea, California 92823

(714) 528 - 8800

www.com-power.com

Advertising