AVE ATM Interface TCPIP232 - Manual (Page 4)

TCPIP232 Setups
The user must be careful to unplug the LAN cable from the ATM. The ATM has the
protection when there is no comunication between the ATM and Host Server in limited
time your ATM will be offline automatically. This peroid is called the “ATM Time Out’. This
time out depends on your ATM system. It is approximately 6-10 seconds.
Stand alone Setup:
Connect the PC/DVR Cable which comes from the TCPIP232 adapter to your
laptop. Power up your TCPIP232 and your laptop and run TCPIP232 Setup to program the
IP Address of the TCPIP232. This IP address will be the same as the ATM machine. Un-
plug your PC/DVR Cable from your laptop and plug it to your DVR Com port. Now your
need to program your DVR to display text insertion.
VSSI-Pro Setup
Connect the TCPIP232 adapter to the VSSI-Pro with the provided cable, connect video,
ATM LAN and power up both units.
1. Enter the VSSI-Pro Main Menu by simultaneously pressing and holding the DOWN and
UP while then press and releasing RESET Button. The main menu will be displayed as
below. So move cursor to ATM Select by press UP or DOWN button. Press SET to enter
the ATM Select Menu.
MAIN PROGRAMMING MENU
* ATM SELECT
SCREEN SETUP
TEXT DISPLAY
COMMUNICATION
EXCEPTION REPORT
ALARM OUTPUTS
TEST/DEMO MODE
DWN/UP LOAD SETUP
HELP
2. On ATM Select Menu, Move cursor to TCPIP Interface then press SET to enter
SDLC
BSYNC
ASYNC
CAMERA PORT
JOURNAL PRINTER
*TCPIP INTERFACE
CUSTOM
EXIT
3. The Menu in TCPIP Interface will be displayed as below:
*TCPIP FORMAT I
TCPIP DEBUGING
EXIT.
PAGE 4