ALLIED Vision Technologies Guppy F-503 User Manual
Technical manual, Avt guppy
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Contacting Allied Vision Technologies
- Introduction
- Guppy cameras
- Declarations of conformity
- Filter and lenses
- Specifications
- Camera dimensions
- Camera interfaces
- Description of the data path
- Block diagrams of the cameras
- Readout schemes: GUPPY interlaced models (F-038, F-038 NIR, F-044, F-044 NIR, F-025, F-029)
- Color correction (only interlaced GUPPYs)
- Horizontal and vertical mirror function (only Guppy F-036/F-503)
- White balance
- Manual gain
- Auto gain
- Brightness (black level or offset)
- Auto shutter
- Look-up table (LUT) and gamma function
- Defect pixel correction (only Guppy F-503B/C)
- Binning (only Guppy F-036B and Guppy F-503B/C)
- Sub-sampling (only Guppy F-503B/C)
- Binning and sub-sampling access (only Guppy F-503)
- Packed 12-Bit Mode
- HDR (high dynamic range) (GUPPY F-036 only)
- BAYER pattern (raw data output)
- Serial interface
- Controlling image capture
- Global shutter (CCD cameras only)
- Pipelined global shutter (only Guppy F-036)
- Electronic rolling shutter (ERS) and global reset release shutter (GRR) (only Guppy F-503)
- Trigger modes
- Exposure time (shutter) and offset
- One-Shot
- Multi-shot
- ISO_Enable / free-run
- Asynchronous broadcast
- Jitter at start of exposure
- User profiles
- Video formats, modes and bandwidth
- Guppy F-033B / Guppy F-033C and board level versions F-033B BL / F-033C BL
- Guppy F-036B / Guppy F-036C
- Guppy F-038B / Guppy F-038C
- Guppy F-038B NIR / Guppy F-038C NIR
- Guppy F-044B / Guppy F-044C
- Guppy F-044B NIR / Guppy F-044C NIR
- Guppy F-046B / Guppy F-046C
- Guppy F-080B / Guppy F-080C and board level versions F-080B BL / F-080C BL
- Guppy F-146B / Guppy F-146C
- Guppy F-503B / Guppy F-503C
- Area of interest (AOI)
- Frame rates
- Frame rates Format_7
- GUPPY F-033 and board level versions: AOI frame rates
- GUPPY F-036: AOI frame rates
- GUPPY F-038 / GUPPY F-038 NIR (only F7M0 and F7M1): AOI frame rates
- GUPPY F-044 / GUPPY F-044 NIR (only F7M0 and F7M1): AOI frame rates
- GUPPY F-046: AOI frame rates
- GUPPY F-080 and board level versions: AOI frame rates
- GUPPY F-146: AOI frame rates
- GUPPY F-503: AOI frame rates
- How does bandwidth affect the frame rate?
- Configuration of the camera
- Camera_Status_Register
- Configuration ROM
- Implemented registers (IIDC V1.3)
- Camera initialize register
- Inquiry register for video format
- Inquiry register for video mode
- Inquiry register for video frame rate and base address
- Inquiry register for basic function
- Inquiry register for feature presence
- Inquiry register for feature elements
- Inquiry register for absolute value CSR offset address
- Status and control register for feature
- Feature control error status register
- Video mode control and status registers for Format_7
- Advanced features (AVT-specific)
- Advanced registers summary
- Extended version information register
- Advanced feature inquiry
- Camera status
- Maximum resolution
- Time base
- Extended shutter
- Test images
- Look-up tables (LUT)
- Defect pixel correction (only Guppy F-503)
- Input/output pin control
- Delayed Integration Enable (IntEna)
- Auto shutter control
- Auto gain control
- Autofunction AOI
- Trigger delay
- Mirror image (only Guppy F-036)
- Pulse-width modulation (board level cameras only)
- Soft reset
- User profiles
- Format_7 mode mapping (only Guppy F-503)
- Low noise binning mode (2 x and 4 x binning) (only Guppy F-503)
- Global reset release shutter (only Guppy F-503)
- GPDATA_BUFFER
- Firmware update
- Appendix
- Index