ALLIED Vision Technologies Marlin F-201 - Manual (Page 137)

Video formats, modes and bandwidth
MARLIN Technical Manual V2.4.0
137
Video formats, modes and bandwidth
The different Marlin models support different video formats, modes and frame
rates.
These formats and modes are standardized in the IIDC (formerly DCAM) spec-
ification.
Resolutions smaller than the generic sensor resolution are generated from
the center of the sensor and without binning.
Note
L
• The maximum frame rates can only be achieved with
shutter settings lower than 1/framerate. This means
that with default shutter time of 40 ms, a camera will
not achieve frame rates higher than 25 frames/s. In
order to achieve higher frame rates, please reduce the
shutter time proportionally.
• The following tables assume that bus speed is
400 Mbit/s. With lower bus speeds (e.g. 200 or 100
Mbit/s) not all frame rates may be achieved.
Note
L
H-binning means horizontal binning.
V-binning means vertical binning.
Full binning (H+V) means horizontal + vertical binning
Binning increases signal-to-noise ratio (SNR), but decreases
resolution.