AmpliVox SW3230 - Manual (Page 9)

AmpliVox SS / SW3230 RTA ASSEMBLY INSTRUCTIONS
9
CABINET ASSEMBLY
CON'T
• With cabinet still lying on its side, install
item (L). Align mounting holes in
brackets with the pilot holes in Panel (7)
and screw in place with item (J) screw.
Position brackets as shown in picture.
• Lay Panel (8) on flat surface. Place
item (A) into large circular cutout
and screw into place with item (H)
screw. 2 Places.
• With cabinet still lying on its side position
Panel (8) in opening and align mounting
hole of hinge with the pilot holes on Panel
(6). Start item (H) screw in all four hinge
mounting holes/pilot holes. Align door and
tighten all four screws.
• Take item (C) and screw into place with
item (J) screw.
• Close door and stand up cabinet.
Assistance is recommended.
• With cabinet standing, lift shelf
brackets until the lock into position.
• Take Panel (10) and position it so that
the long dimension is left to right, not
front to back. On the underside of
shelf, locate the pilot holes and align
with holes in brackets. Attach using
item (J) screw. 4 Places.
C