Eikos - ref. eks500 rear panel description – Analog Way Eikos User Manual
Page 3
Eikos - Ref. EKS500
Rear Panel Description
VIDEO OuT
AuDIO INPuT
AuDIO OuTPuT
RS-232 communication port on a
DB9 female connector or TCP/IP
on Rj45 connector
Power supply: IEC/EN/uL/CSA 60950-1,
internal, autoswitchable
universal Analog Computer/TV/HDTV inputs
SD-SDI/HD-SDI inputs
#
1 to
#
4: female BNC
DVI inputs
#
1 &
#
2: female DVI-I (digital pins)
and #5 & #6: analog inputs on DVI-A
Outputs
#
1 (Main) &
#
2 (Preview): female
HD15, DVI-I (analog pins)
Connectors:
1x BNC-F: SD/HD-SDI (with audio embedded)
3x BNC-F: Y_Cb_Cr
1x Mini Din 4: S. Video
1x BNC-F: Composite video PAL/NTSC
Balanced or unbalanced
mono/stereo Outputs (all pin
MCO mode connector)
IP-LAN connector
Balanced or unbalanced mono/stereo inputs
(all pin MCO male connectors)
O P E R AT I O N S O V E RV I E W
WORKING IN MIXER MODE
1-
Select an
input
.
2-
On the preview screen, the input appears
3-
Select an
EFFECT
(open/close)
4-
Press
TAKE
to view the result on the Main screen
WORKING WITH PIPs IN MIXER MODE
1-
Press the
PIP2
button. On the preview screen, the PIP (layer) appears as a
color rectangle
2-
Select an input. On the preview screen, the input appears in the layer rectangle
3-
Adjust the PIP (layer) with
ADJUSTMENT
button (Pos & Size or Zoom)
4-
Select a transition (open/close) or an effect into Layer menu [Home menu]
5-
Press
TAKE
to view the result on the main screen
6-
To remove layer, press
BLACK
then
TAKE
7-
For another PIP setup, repeat from step #1
AUDIO INPUT/OUTPUT CONNECTIONS
L+
L-
R+
R-
UNBALANCED
Left
Right
GROUND
L+
L-
R+
R-
BALANCED
L+
R+
L-
R-
GROUND(S)
H O M E M E N U
-
MODE:
select to choose which mode the Eikos will work in (Mixer or Matrix or Quadravision Mode)
-
INPUT:
select to configure the 12 individual input types and resolutions
-
MAIN OUT:
in Mixer or Quadravision mode, select to set the output types and resolutions of the Main output
-
OUTPUT 1:
in Matrix mode, select to set the output types and resolutions of Output
#
1
-
PREVIEW OUT:
in Mixer mode, select to set the output types and resolutions of the Preview output
-
OUTPUT 2:
in Matrix mode, select to set the output types and resolutions of Output
#
2
-
VIDEO OUT:
select to configure Video output card settings
-
PREDEFINED LAYOUT:
select a layout for the Quadravision Mode
-
PRESET:
select to store and use presets
-
IMAGE:
select to change source image settings of an input
-
KEYING/TITLING:
select to access keying and titling controls and parameters when video layer is
selected
-
LAYER:
select to adjust layer size, position, border, transparency or transitions
-
LOGOS/FRAMES:
select to store (record), use and manage logos and frames into the Eikos
-
AUDIO:
select to access all audio input and output parameters
-
OSD SETTINGS:
select to display OSD
-
CONTROL:
select to access device software information, LAN settings, reset factory settings,
amongst other user oriented functions (see next page)
-
VIRTUAL T-Bar:
select to access the Virtual T-Bar
MCO male connectors
Inputs #1 to #6: Balanced & unbalanced connection
Inputs DVI #1 to DVI #2: Balanced & unbalanced connection
Input AuX: Balanced & unbalanced connection
Outputs #1 to #2: Balanced & unbalanced connection