Analog Way Eikos LE - Manual (Page 76)

Working with Logos
It is possible to store up to 8 logos in the Eikos LE non volatile memory. Logos work in much the
same way as frames, and can be recorded from any of the Eikos LE’ 12 sources.
Logos have more attributes than frames. They can be sized, positionned, but also keyed via color
cutout selection or Luma Key.
Memorizing Logos
1. In the Input Selection section, click on the
source button (#1 to #12) of the source you
wish to record as a logo.
2. In the Logos/Frames tab, click on Record
Logo, then select an empty logo memory slot
(#1 to #8) to record your logo into.
3. Adjust position, size and keying attributes for
your logo.
4. Click Execute to record your logo into the
selected memory slot. The Eikos LE RCS
will display a progress bar while recording the logo.
5. In the Input Selection section, click the LOGO1 button, and select logo number (#1 to #8) you
wish to use. Your logo will appear on the preview screen above any existing layer on screen.
6. Click on the TAKE button. Your logo will appear on the main display.
The Eikos LE offers a wide variety of transitions
between the scenes you create for your shows
and events. It allows for live recall of 4 user
presets, each of which you can edit at any given
time.
1. In the Layer Selection section, click on
the PIP1 button. On your Preview screen,
PIP1 will appear as a color rectangle. The
parameters of the layer will automatically
appear in the RCS Preview section.
2. At the bottom of the Preview section, click on
the Transition tab, then select the transition
type from the left dropdown menu, and the effect behaviour from the right dropdown menu.
3. Determine effect duration by sliding the duration bar left (shorter) or right (longer), or by manually
setting the value in the duration value box.
4. Repeat the procedure in the Closing Effect tab to determine the way your layer will close.
Layer transitions & effects
74