Analog Way Smart MatriX - Manual (Page 4)

Going further with the Smart MatriX
For complete details and operations procedures, please refer to the Smart MatriX User’s Manual and our website for
further information: www.analogway.com
Version : 4.40 - 20/12/2011
Code : 140123
How to do an AutoTake ?
Warranty
This Analog Way product has a 3 year warranty on parts and labor, return to factory. This warranty does not include faults
resulting from user negligence, special modifications, electrical surges, mishandling (drop/crush), and/or any other damage
caused by misuse.
NOTE: The updater files are available on our website: http://www.analogway.com
HOME MENU (extract)
CONTROL AutoTake
The Autotake function performs a TAKE automatically each time an input is selected.
 Enabled or disabled
How to record & display a still Frame?
HOME MENU (extract)
LOGOS / FRAMES Record Frames Frame #1 to #8
Frame: Full and individual picture.
Logo: Part of picture like a graphic symbol which represent a company or organisation.
It is possible to store up to 8 frames and 8 logos in the SMX200 non volatile memory.
► Select [ RECORD FRAMES ] in the Logos/Frames menu.
► A white rectangle will appear on your main display, indicating the Frame which will be captured.
► Select an empty Frame memory to store the Frame into.
► Press the [ BKGND/FRAME ] button, select a Frame number (#1 to #8), then press the [ TAKE ] button.
Your background Frame will appear on your main screen, under any other active layers. Be sure to clear or
move any other layers to expose the Background Frame layer.
► To remove the Frame, press [ BLACK ] button, then [ TAKE ] button.
The [Empty] term appears next to all unused slots.
The advanced features are available by the exter-
nal remote control.
How to disable the HDCP encryption?
How to use the Auto-Lock Function ?
[ AUTO-LOCK ] allows to select an input only if a signal is connected.
HOME MENU (extract)
HOME MENU (extract)
HOME MENU (extract)
INPUT
CONTROL
MAIN OUT
PREVIEW OUT
DVI1 or DVI2
Auto-Lock
HDCP Detection
HDCP enable
Disabled
Automatic
The HDCP Encryption can be disabled on DVI inputs #1 to #2 or/and Main Output / Preview Output.
If you want to use HDCP content from your sources, be sure to use only HDCP compliant screens or projector. If it’s
not the case, the output image could be disabled. When displaying HDCP protected sources on non HDCP compliant
equipment, the following message will be displayed on the device screen: « Due to HDCP content, non HDCP screens
cannot display protected sources ».
Screen will go to black without displaying the HDCP input image, or partially layer out on HDCP content.
The output status can provide you all information about the output in real time. This feature is particularly useful when
HDCP is used with long cable to be sure the communication is well handled.


Enabled or disabled
Enabled or disabled