Analog Way SmartMatriX2 - Manual (Page 49)

49
8.1.1 Menu navigation
8. OPERATING THROUGH THE FRONT PANEL
8.1 Front panel
To access the SmartMatriX² menu, press the EXIT/MENU button in the
control section. To highlight items in the menu which will appear on the
VFD screen, turn the scroll knob left or right to the desired menu item.
When you have reached the desired menu item, press the ENTER button
in the control section to access that menu function. Pressing the ENTER
button when a selection has been made sets the value to that selection
in the SmartMatriX² memory. When all settings have been made, press
the EXIT/MENU button to exit sub-menus and return to the main menu.
Pressing the MENU button in the menu section of the SmartMatriX², will display and give you access to the
following items on the menu VFD screen:
- OUTPUT 1: select to set the output types and resolutions of Output #1,
- OUTPUT 2: select to set the output types and resolutions of Output #2,
- VIDEO OUT: select to configure Video output card settings,
- INPUT: select to configure the 10 individual input types and resolutions,
- PRESET: select to store and use presets,
- IMAGE*: select to change source image settings of an input,
- KEYING/TITLING*: select to access keying and titling controls and parameters when video layer is selected,
- SCREEN: setup your background color and your Quick Frame,
- LAYER*: select to adjust layer size, position, border, transparency or transitions,
- FRAMES/LOGOS: select to store (record), use and manage logos and frames into the SmartMatriX²,
- AUDIO: select to access all audio input and output parameters,
- CONTROL: select to access device software information, LAN settings, reset factory settings, and other user
oriented functions.
* These items are only displayed if a valid input is assigned to the current layer.
The SmartMatriX² offers 1 mode to work from: the Matrix mode which turns your SmartMatriX² into a true
10 x 2 scaled matrix with numerous effects and PIPs and logos.
8.1.1 Menu navigation
8.1.2 Home menu
8.1.3 Operating modes
Simply selecting a menu item will not set it to that value. Be sure to press the ENTER button when
parametering the menu items or to push the scroll knob.