Analog Way QuickMatriX - Manual (Page 34)

34
7.2.7 Frame management
Set it manually looking at the color change into Current color. If you want, you can quickly select a color from
a color panel, clicking on CURRENT COLOR. Then click on the color itself to obtain the color panel. Once
your main color is chosen, you can define a degree of tolerance around this color. The tolerance will define,
around the main color, an area that will be keyed too. You may still need to make further adjustments to the
luminance level to complete your key effect.
- Grabber: activate the grabber to grab the color you want to key. Move the cursor and click on the grab
button to grab the color.
To save a frame click on this button:
The next page opens.
From here you can capture from the main or from the Preview.
You can still freeze the output before saving your frame.
7.2.7 Frame management
How to save a frame:
Choose first Program or Preview, click on FREEZE if you want to freeze your output. Then click on EXECUTE to
save your frame into the selected slot.