Analog Way Smart Edge FX - Manual (Page 46)

44
- Soft Edge Blending Adjustments (continued)
Finally, since the overlapping zone receives the same image from the video projectors twice, adjustments
have to be done inside the overlapping area.
Making a perfect blend entails gradually decreasing the light provided by the video projector on the left side
of the overlapping zone, while gradually increasing the light provided by the video projector on the right side,
at the same time.
With the help of these different adjustments, the overlapping areas are less visible, and you are ready to
achieve a projection that is as seamless as possible.
Result is:
- Soft Edge Blending Contents for Projection
To develop an effective presentation, you are encouraged to use
various types of sources: computer, camera, VCR, DVD, Blu-
Ray... Many options are possible and they will help you create an
attractive presentation that compellingly conveys your message.
Here are a few tips to obtain the best possible results. To ensure
a successful Edge Blend it is fundamentally important that the
image used as the background be at the same resolution and
aspect ratio as the blended projection. In other words, the image
needs to fit with the size of your screen. If your image is too large,
part of it will not appear on the screen. If too small, the image will
not cover the entire surface of the screen, which will not produce
a satisfying result.
Luma
Left projector
Right projector
Y2
Y1
X
100%
Screen