Analog Way RK-300 - Manual (Page 2)

Front Panel Description
WORKING WITH THE RK-300
Toggle Standard or Mosaic mode
when available.
Switch between Status & Control Mode.
Exit from menu.
Buttons and functions are available according to the unit wich is controlled.
PREVIEW
EXIT/MENU
BACKGROUND/FRAME: Select the Frame Layer.
BACKGROUND LIVE/ PIP 1: Select the Live Layer/PIP1.
PIP 2: Select the PIP2 live Layer.
PIP 3: Select the PIP3 live Layer.
LOGO 1: Select the Logo 1 Layer.
LOGO 2: Select the Logo 2 Layer.
DSK: Shortcut to the Keying/Titling menu for the selected source.
#1 L/ F 1: Press to access source #1, Frame #1 or Logo #1.
#2 L/ F 2: Press to access source #2, Frame #2 or Logo #2.
#3 L/ F 3: Press to access source #3, Frame #3 or Logo #3.
#4 L/ F 4: Press to access source #4, Frame #4 or Logo #4.
#5 L/ F 5: Press to access source #5, Frame #5 or Logo #5.
#6 L/ F 6: Press to access source #6, Frame #6 or Logo #6.
#7 L/ F 7: Press to access source #7, Frame #7 or Logo #7.
#8 AL/ F 8: Press to access source #8, Frame #8 or Logo #8 or Animated Logo.
DVI 1 to DVI 2: Press to access DVI #1 or DVI #2.
SDI 1 to SDI 4: Press to access SDI #1,2,3 or 4.
BLACK: Change the active layer to Black to clear a layer or PIP.
FREEZE: Freeze the input linked to the current layer on MAIN.
OUTPUT #1: Press to select the Output #1, select a layer and a source then press [TAKE] .
OUTPUT #2: Press to select the Output #2, select a layer and a source then press [TAKE] .
SHIFT: Secondary function selection button.
INPUT
MATRIX
SHIFT
LAYER