BEI Sensors GHM4 Incremental Rotary Encoder - Manual

GHM4 BEI Sensors SAS
Espace Européen de l’Entreprise
9, rue de Copenhague
Tél : +33 (0)3 88 20 80 80
INCREMENTAL ENCODERS, GHM4 RANGE
 With its 40mm size and a 6mm solid shaft, this encoder characterizes itself by its strength
and robustness of the mechanical and opto-electronic components, it’s the most
compact truly industrial encoder with a solid shaft
 Coded discs in synthetic material are used: stable and unbreakable (Polyfass™, Mylar-
Myca composite)
 Available resolution up to 2 500 counts per turn
 Universal electronics 5 to 24Vdc available
 Application fields : micro-robotics, printing machines, low power DC motors, shears…
Fax : +33 (0)3 88 20 87 87
Mail : [email protected]
Web : www.beisensors.com
B.P. 70044 Schiltigheim
F 67013 Strasbourg Cedex
GHM4 connection G3A (axial cable) GHM4 connection G3R (radial cable)
GHM4 connection G2A / GDA (axial DIN)
CHARACTERISTICS
Shaft: stainless steel EN 50082-2 (1995)
Cover: aluminium
EMC
EN 50081-1 (1992) Material
Body: aluminium Isolation 1 000 Veff
Bearings 688 serie Operating temperature - 20... + 80 °C (encoder T°)
Axial : 10 N Storage temperature - 40... + 80 °C
Maximum loads
Radial : 20 N Protection CEI60529 (1989) IP 54
Shaft inertia  0,2.10 -6 kg.m 2 Shocks (EN60068-2-27)  300 m.s -2 (during 11 ms)
Torque  2.10 -3 N.m Vibrations (EN60068-2-6)  100 m.s -2 (10 … 500 Hz)
Permissible max. speed 12 000 min -1 Theoretical mechanical lifetime 10 9 turns (F
axial
/ F
radial
)
Continuous max. speed 9 000 min -1 5 N / 10 N 263
Encoder weight (approx.) 0,190 kg 10 N / 20 N 33
Changes possible without further notice V2.0