American Standard 2171 - Manual

C17
© 2008 AS America Inc.
Standard ®
SINGLE CONTROL LAVATORY FAUCET
GENERAL DESCRIPTION:
Cast brass body. Genuine porcelain lever handle.
Washerless 47mm ceramic disc valve cartridge. Equipped
with a hot limit safety stop. Braided flexible supply hoses
with 3/8" compression connectors. Fitting can be mounted
on 4" centers using supplied brass escutcheon or by single
hole mounting method using supplied decorative ring. All
metal pop-up drain. 1.5 gpm/5.7L/min. maximum flow rate.
PRODUCT FEATURES:
Cast Brass Construction: Durable. Easy to clean,
seamless design. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
smooth handle operation and drip-free performance.
Adjustable Hot Limit Safety Stop: Limits the amount
of hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Low Lead: Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Genuine Porcelain Handle: Lever handle.
Choice of Finishes: Available in Polished Chrome or
Satin Nickel (PVD).
MODEL NUMBER:
2171 Single Control Lavatory
Pop-up drain. Porcelain Lever Handle. Polished Chrome
finish.
2171S Single Control Lavatory
Pop-up drain. Porcelain Lever Handle. Satin Nickel
(PVD) finish.
SUGGESTED SPECIFICATION:
Single control lavatory faucet shall feature a cast brass body and porcelain lever handle. Fitting shall be equipped with
flexible supply hoses with 3/8" compression connectors. Shall also feature washerless ceramic disc valve cartridge. Fitting
shall be equipped with a hot limit safety stop. Fitting shall be American Standard Model # 2171_.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Product
Number
Description
2171 Single Control Lavatory faucet with pop-up drain. Porcelain Lever handle. Polished Chrome finish.
2171S Single Control Lavatory faucet with pop-up drain. Porcelain Lever handle. Satin Nickel (PVD) finish.
Meets the American Disabilities Act Guidelines and
ANSI A117.1 Requirements for the physically
challenged.
171mm
(6-3/4")
445mm
(17-1/2")
77mm
(3")
89mm
(3-1/2")
152mm
(6")
130mm
(5-1/8")
64mm
(2-1/2")
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
100 80 60 40 20