BEI Sensors ES25 Incremental Encoder - Manual

Tel:805-968-0782 / 800-350-2727 | F 805-968-3154 / 800-960-2726
7230 Hollister Ave., Goleta, CA 93117 |
www.beisensors.com
ax:
Specification No. 02104-001 Rev. 06/11
ES25
Mechanical
Mating Shaft Diameter: 1/4” and metric version
ineered plastic
s
Magnetic Coupling Cover: Eng
Starting Torque: 0.5 oz-in max
d aluminum castings)
Enclosure: Aluminum (seale
Maximum RPM: 5000 RPM
-4 2 Moment of Inertia: 62.3 X 10 oz-in-sec
/s/s
Maximum Acceleration: 24,000 rad
eg/ z-in
Torsional flexibility: 0.37 d
o
ic Error: 3 arc-min
RMS
Kinemat
eight: 18 oz W
Electrical
Supply Voltage: 5 to 28 VDC available
Voltage/ Output:
28V/V: Line Driver, 5-28 VDC in, V out = V in
28V/5: Line Drive, 5-28 VDC in, V out = 5 VDC
28V/OC: Open Collector, 5-28 VDC in, OC out
Current Requirements: 100 mA typical + output load, 250
mA (max)
Protection Level: reverse, overvoltage and output short
circuit
Code: Incremental
Output Format: 2 Channels in quadrature, with ½ cycle index
gated with negative B channel
Cycles per Shaft Turn: 1 to 2,048 (See Table 1)
Frequency Response: 100 KHz
utput Terminations: (See Table 2) O
Environmental
Temperature: Operating, 0° to 70°C; storage (non-operating),
-25° to 90°C. Consult factory for extended temperature
ratings.
Shock: 25 g’s for 11 msec duration
Vibration: 5 to 2000 Hz @ 10 g’s
Humidity: 100% RH with condensation
Enclosure Rating: IP67 / IP68 (Consult factory for IP68
pplications) a
Environmentally Sealed Incremental Encoder
ES25 Environmentally Sealed Incremental Encoder Ordering Options
For assistance, call 800-350-2727
Use this diagram, working from left to right, to construct your model number.
Example
: ES25D-37-500-ABZC-28V/V-SM18-S (-S: special shaft, diameter/ length, output level or termination)
ES25 S
Type:
2.50” Diameter
Housing
Cycles per Turn:
See Resolution Table 2
Channels:
ABZC = Dual with Index
and complements
ABC = Dual w/comp.
ABZ = Dual w/index
Special Feature
Consult Factory s:
Output Termination:
M14 = MS3102R14-1P
M16 = MS3102R16-1P
M18 = MS3102R18-1P
Voltage/Output
28V/V = 28 V in/out
28V/5 = 28 V in/5 out
28V/OC = 5-28Vin / OC out
Specifications
The
ES25 is a rugged incremental encoder that is environmentally
sealed through the use of a magnetic shaft coupling connection.
This connection allows the encoder to be completely enclosed
and sealed against water ingress. It is rated to IP67 and can
operate while fully immersed in one meter of water for up to 30
minutes. The magnetic coupling isolates the encoder from
external equipment, protecting it from high shock, vibration and
environmental debris. Since the ES25 is not physically coupled to
external equipment, the problem of shaft misalignment is
eliminated, meaning no more broken couplings!
The ES25 is ideal for applications with heavy wash-downs,
temporary water immersions, and excessive environmental
debris. It combines the high accuracy, repeatability and
robustness needed for use in harsh environments and can help
reduce costly downtime of your system.
S
Output L
S = Side ocation:
D
Housing Config:
D = Square Flange
Magnetic Hub Bore:
25 = 0.250”
lank = None B
Consult factory for other sizes