BEI Sensors PHM5 Absolute Hollow Shaft Encoder - Manual

PHM5
BEI Sensors SAS
Espace Européen de l’Entreprise
9, rue de Copenhague
B.P. 70044 Schiltigheim
F 67013 Strasbourg Cedex
Tél : +33 (0)3 88 20 80 80
Fax : +33 (0)3 88 20 87 87
Mail : [email protected]
Web : www.beisensors.com
PARALLEL ABSOLUTE MULTITURN ENCODER - PUSH PULL - PHM5 RANGE
 Solid shaft Ø 6 and Ø 10 mm,
 Robustness and excellent resistance to shocks / vibrations,
 High protection level IP65, IP67 option with a sealing flange,
 High performances in temperature –20°C to +85°C,
 Parallel output – push pull electronic,
 Universal electronic circuits from 5 to 30Vdc,
 Protection against short-circuits and inversion of polarity,
 High resolutions available: 8192 (13 bits) per turn,
 Turn counting up to 65 536 (16 bits),
 Reset, Select, Latch, Direction functions,
 Option: push-button on the cover for an encoder reset to a value X.
PHM5 PARALLEL DIMENSIONS
MECHANICAL CHARACTERISTICS
Cover : steel Shock (EN60068-2-27)  500 m.s -2 (during 6 ms)
Body: aluminium Vibration (EN60068-2-6)  100 m.s -2 (10… 2 000 Hz) Material
Shaft : stainless steel EMC EN 61000-6-4, EN 61000-6-2
Bearings 6 000 serie Isolation 100V (1 min.)
Axial : 50 N Weight (connector) 0,750 kg
Maximum load
Radial : 100 N Operating temperature - 20 ... + 85 °C (encoder T°)
Shaft inertia  1.10 -6 kg.m 2 Storage temperature - 20 ... + 85 °C
Torque  4.10 -3 N.m Protection(EN 60529) IP 65 (IP67 with flange option)
Permissible max. speed 6 000 min -1 Theoretical mechanical lifetime 10 9 turns (F
axial
/ F
radial
)
Continuous max. speed 6 000 min -1 25 N / 50 N : 99 50 N / 100 N : 12
SCHEMES
Changes possible without further notice - Version 110310