AEG 2842-6 I - Manual (Page 6)

6
Remove transport safeguard
The appliance and the interior fittings are protected for transport.
• Remove all adhesive tape and packing pieces from the interior of the
appliance.
You can remove any remnants of adhesive using white spirit.
Warning! Before disposing of old appliances make them inoperable.
Remove plug from mains, sever the power cable, remove or destroy any
snap or latch closures, to prevent small children being trapped inside.
• Use an authorised disposal site.
23
D726
B
Apply covers (B) on joint cover
lugs and into hinge holes.
Place guide (A) on the inside part
of the furniture door, up and down
as shown in the figure and mark
the position of external holes.
After having drilled holes, fix the
guide with the screws supplied.
20 mm
A
50mm
PR166
Separate parts A, B, C, D as
shown in the figure
PR266
A B
C
D