Anritsu MG3700A - Manual (Page 26)

26
Display Setting range
Scrambling Code 0 to 8191
CPICH
ON/OFF ON or OFF
Power –40.00 to 0.00 [dB], Resolution 0.01 dB
P-CCPCH
ON/OFF ON or OFF
Power –40.00 to 0.00 [dB], Resolution 0.01 dB
ON/OFF ON or OFF
PICH Power –40.00 to 0.00 [dB], Resolution 0.01 dB
Channelization Code 0 to 255
ON/OFF ON or OFF
Power –40.00 to 0.00 [dB], Resolution 0.01 dB
0 to SF –1
The spreading factor (SF) varies depending on the [Data]
setting as follows:
RMC 12.2 kbps = 128
DPCH Channelization Code RMC 64 kbps = 32
RMC 144 kbps = 16
RMC 384 kbps = 8
AMR1/AMR2/AMR3 = 128
ISDN = 32384 kbps Packet = 8
Data
RMC12.2 kbps / RMC 64 kbps / RMC 144 kbps / RMC 384
kbps / AMR1 / AMR2 / AMR3 / ISDN / 384 kbps Packet
OCNS
ON/OFF ON or OFF
Type 16 Codes or 6 Codes
ON/OFF ON or OFF
HS-SCCH1/2/3/4
Power –40.00 to 0.00 [dB]
Channelization Code 0 to 127
Data PN9/PN9fix/PN15fix/16bitRepeat/Coded
ON/OFF ON or OFF
HS-PDSCH1/2/3/4
Power –40.00 to 0.00 [dB]
Channelization Code 0 to 127
Data PN9/PN9fix/PN15fix/16bitRepeat/HS-DSCH
P-CCPCH Edit SFN Cycle 8 or 4096
DPCH Edit
DTCH Information Data PN9/PN9fix/PN15fix/16bitRepeat
TFCI 0 to 1023
Channelization Code Offset 1 to (16 - "Number of Physical Channel Code")
Number of Physical Channel Code 1 to (16 - "Channelization Code Offset")
Modulation QPSK or 16QAM
HSDPA transport channel
Transport Block Size Information 0 to 63
(HS-SCCH,HS-PDSCH
RV Information 0 to 7
UE Identity 0 to 65535
parameters)
CRC Error Insertion Correct or Fail (CRC error of all)
Number of HARQ Processes 0 to 8
Virtual IR Buffer Size 800 to 304000 (Resolution: 800)
Payload Data PN9/PN9fix/PN15fix/16bitRepeat
HARQ Process Cycle
0 to 16 (Note that it ranges from 0 to 6 if PN9 has been set for
Payload Data.)
Transmitting Pattern Edit Inter-TTI Distance 1 to 8
TTI Start Offset 0 to 7
Process Setting File Used or Not used
• Downlink parameter setting range:
Optional
MX370101A HSDPA IQproducer
*MX370X_E_050127 1/28/05 8:53 AM Page 26