ASA Electronics AOM-7694 - Manual (Page 4)

CONTROLS AND OPERATION
MENU SELECT DN UP
VOLUME
1 2 3 4 5 6 7 8
1. POWER ON/OFF
-Press once to turn the unit on.
-Press again to turn the unit off.
-With power applied and the unit turned off, only the red power button is backlit.
-When unit is turned on, all buttons are backlit.
-Press once to enter main menu mode (See Figure1).
-Press again before time out to exit the menu mode.
-Time out of OSD menu is approximately 8 seconds from when the last
key was pressed.
2. MENU
MENU
BRIGHTNESS
CONTRAST
COLOR
TINT
INPUT SETUP
AUTO-SCAN
SPLIT SCREEN
DISTANCE MARKERS
ADVANCED MENU
MAIN MENU PRESS TO NAVIGATE UP/DOWN
PRESS TO EXIT MAIN MENU
BRIGHTNESS
PRESS TO ADJUST +/-
PRESS TO GO BACK TO
MAIN MENU
SELECT
'BRIGHTNESS'
Figure. 1 Main menu
4
A O M - 7 6 9 4 A O M - 7 6 9 4
PRESS TO GO BACK TO
MAIN MENU