ADC TrueNet Termination Block - Manual (Page 2)

9/08
•
102097AE
TrueNet
®
CopperT
en
®
T
er
m
in
at
io
n
B
lo
ck
TrueNet ®
CopperTen ® Termination Block
2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Specifications
MECHANICAL
Wire range for solid and stranded copper conductors:
0.4 mm to 0.65 mm (26 to 22 AWG)*
Wire insulation diameter range (PE, PVC): 0.7 mm to 1.4 mm
Number of wire terminations: > 100
Wire insertion force (0.5 mm conductor diameter): 6 N
Wire pull out force, radial (0.5 mm conductor diameter): 5 N
Wire pull out force, axial (0.5 mm conductor diameter):
35 N
Number of patching cycles: Modules: up to 750
Patch Plugs: up to 200
ELECTRICAL
Transmission, performance and reliability:
TIA-568.B.2-10 standards
Voltage/current rating at 25 ºC (77 ºF) ambient: 150 VAC at 2.5A max
Insulation resistance: > 50,000 M at 500 VDC
ENVIRONMENTAL AND SAFETY
Safety compliance:
UL 1863
Flammability rating of plastic housing: UL 94-VO
Environment for use: Indoors or in dry enclosure
* Should there be a requirement to terminate cables other than 10 Gigabit cable, a maximum of 2 equal diameter
solid conductors only, of up to 0.5 mm conductor diameter can be terminated per slot. Only 1 conductor of
stranded wires per slot can be terminated. If any conductors >0.5 mm diameter have been terminated, reversal
to smaller conductors is no longer possible.