Draw-Tite 50066 CUSTOM QUICK INSTALL BRACKETS - Manual

* 5/16” THICK
SPACER (10)
* ½” x 2” CARRIAGE
BOLT (10)
DRIVERS
SIDE
FRAME
* ½” SERRATED WASHER,
LOCK WASHER & NUT (10)
1
4
6
5
2
3
VEHICLE FORWARD
Figure 1
ACCESS
HOLE
Equipment Required:
Fastener Kit: 50066F
Wrenches: ¾” & 15/16”
Drill Bits: 1/8” & 9/16” Drill
Other Tools: Center Punch, Measuring Tape
WARNING:
Under no circumstances does Cequent Performance Products, Inc. recommend exceeding the towing vehicle
manufacturers recommended vehicle towing capacity.
2011, 2014 Cequent Performance Products, Inc. Printed in Mexico Sheet 1 of 18 50066N 04-16-14 Rev. D
Installation Instructions
CUSTOM QUICK INSTALL MOUNTING KIT
Chevrolet/GMC 2500/3500
Part Number
50066
2011 & up 2500 & 3500
6’6”, & 8’ Bed Pickup Installation
READ ALL INSTRUCTIONS BEFORE STARTING THE INSTALLATION
4
3
ITEM # DESCRIPTION QUANTITY ITEM # DESCRIPTION QUANTITY
1 FRAME BRACKET, LH 1 4 SQUARE HOLE PLATE 4
2 FRAME BRACKET, RH 1 5 5/8" SERRATED WASHER 4
3 5/8-11 x 2" CARRIAGE BOLT 4 6 5/8-11 HEX NUT 4
7 5/8-11 PULL WIRE 4
7
PULL WIRE
ASSEMBLY
Free end of pull wire
10 Bolt System: Instructions for 58058 or 30035 on pages 1-3. Fasteners shown with (*) are supplied with rail kit 58058. **
4 Bolt System: Instructions for 30124 or 30095 on pages 4-6. Fasteners shown with (*) are supplied with rail kit 30124. ***
** If fasteners with rail kit are missing, order service kit 58430.
10 BOLT INSTALLATION
Custom Quick Install mounting brackets only include the hardware to attach the custom brackets to the frame..
HEAD MARKING
OF GRADE 8 BOLT
HEAD MARKING
OF GRADE 5 BOLT