Draw-Tite 58386 ADAPTER KIT - Manual

1/4 2
1/4 2
2009 & UP-DODGE RAM 1500, INCLUDING CREWCAB ( USE WITH 30035 KIT )
Forward Side Bracket
*
Optional weld
pattern
*
1/4 2
1/4 2
*
Bed Sill
CAUTION!
Read pages 2-3 of 30035 instructions before starting installation. Failure to do so could result in significant vehicle damage!
CAUTION!
Check for obstructions before drilling. Failure to do so could result in damaged fuel or brake lines, structural members, etc.
TOWING PRODUCTS does its best to communicate tow vehicle manufacturer changes; however, it is ultimately the responsibility of
the installer to prevent damage due to installation.
z 2008, 2009 , 2013 Cequent Performance
Sheet 1 of 1 58386N 10/24/13 Rev. D
King Pin Center
approx. 1-1/2” forward
of axle center.
Bed Sill
Axle Center
Use provided(30035 kit) tube
spacers and 4-
1/2” carriage bolts
to attach through Bed Sill
30 1/4” Long Box
Front of
Vehicle
Rear Edge
of Truck
Bed
Measure from Rear Edge
of truck bed to rear edge of
base rail.
RO
W
1
R
O
W
2
RO
W
3
RO
W
4
Each base rail must
have a bolt in either
of the marked center
holes. Check for
obstructions before
drilling.
28 5/8” Short Box
Drill through
Bed Sill with
17/32” drill.
Open up hole
through truck
bed only with
1” dia. drill.
Drop tube
spacer through
hole in truck
bed to avoid
crushing Bed
Sill when
torquing 4-
1/2”
carriage bolt.
IMPORTANT NOTES FOR THIS INSTALLATION:
1. Tube spacer and 4 1/2” carriage bolt used to attach through forward Bed Sill (Row 2).
2. **Rib neck bolts will need to be pulled through access holes in frame with supplied pull wire (see below).
3. Do not drill thru both walls
of frame. Drill only thru wall
of frame to which bracket is
mounted.
(Crewcab models (less than
6’ bed) require a Sidewinder
Pinbox Coupler)