Draw-Tite 59004 ROOF TOP CARGO BOX - Manual (Page 2)

Product Code:
Product Name:
www.rolaproducts.com
59004N Rev A 6-21-11
Cequent Performance Products, Inc.
Plymouth, MI 48170
59004
• If cross bars are adjustable, set to widest
position of 34-1/2” (876mm) center to center of
cross bar.
• This product fits the following cross bar
spacing's:
- 27-1/2” (700mm) Minimum
- 29-1/4” (743mm)
- 31” (787mm)
- 32-3/4” (832mm)
- 34-1/2” (876mm) Maximum
Page 2
6
Please read all instructions carefully before assembly, installation and/or use of this product.
Minimum bar spacing = 27-1/2” (700mm)
3
Roof Top Cargo Box
5
• Check for rear hatch and front hood
clearance. Adjust cross bars for proper
clearance.
• NOTE: Interference is unavoidable on some
vehicles.
• NOTE: Mount box towards the rear of vehicle
to minimize wind resistance.
4
• Slide cross bars forward or backward to line up
holes in cargo box with cross bars.
• To secure Cargo Box to cross bars, install the
u-bolts around cross bars and through holes
in bottom of Cargo box.
• Place the gasket, clamp block, and clamping
knobs onto u-bolts as shown.
• Firmly hand tighten clamping knobs.
• Install hole plugs into remaining unused holes
in bottom of cargo box.