Slide number 2, Item description, Trunk mount 2 bike carrier – Draw-Tite 63139 BIKE CARRIER - PRO SERIES DUETTE - TRUNK MOUNT User Manual

Page 2: Mounting rack to vehicle

Advertising
background image

:

:

63139

Cequent Performance Products
Plymouth, MI 48170

63139N Rev B 11-13
Printed in China

Trunk Mount 2 Bike Carrier

Page 2 of 12

Mounting Rack to Vehicle:

1.

Hold the bike rack in approx. location on vehicle to see if the lower support needs to be put in the

raised position (1-7/8” difference). Reference figure 1 and last sentence of note 4 to move support.

2.

Rest lower support tube on vehicle bumper, on vehicle license plate, or a vertical portion of trunk or

hatch. Find most solid position as possible. DO NOT rest against unsupported plastic bumper,

vehicle badges, or thin flexible sheet metal.

3.

Loosen upper support tube adjustment knobs and rotate upper support tube so that it contacts vehicle.

Main support assembly arms should be at a slight angle upwards. Tighten adjustment knobs.

4.

Attach upper hook straps to top edge of trunk or hatch. If a spoiler is present, straps should be routed

under spoiler if possible. Never attach to glass, plastic or trim.

5.

Attach lower hook straps to bottom edge of trunk or hatch. Ensure strap is not close to vehicle

exhaust.

6.

Adjust upper straps for equal tension. Adjust lower straps for equal tension.

FIGURE 2

FIGURE 3

Spacer

ITEM

DESCRIPTION

Adjustment knob

1/4 -20 x 1-3/4” long

Carriage Bolt

1/4-20 x 1-3/4 Long Hex Bolt

Strap – Carrier End

1/4-20 Lock Nut

1/4-20 Hex Nut (see note 4)

Shown Assembled

Shown Assembled

FIGURE 4

Strap – Carrier End

Strap – Vehicle End

Advertising