EBARA EFQT3 - Manual (Page 6)

EBARA Fluid Handling 6
INSTALLATION – SECTION B
Review all SAFETY information in Section A.
Since pump installations are seldom identical, this section offers only general recommendations and
practices required to inspect, position and arrange the pump and piping.
Most of the information pertains to a standard static lift application where the pump is positioned
above the level of liquid to be pumped.
If installed in a flooded suction application where the liquid is supplied to the pump under
pressure, some of the information such as mounting, line configuration, and priming must be tailored
to the specific application.
Since the pressure supplied to the pump is critical to performance and safety, be sure to limit
incoming pressure to 50% of the maximum permissible operating pressure as shown on the pump
performance curve.
For further assistance, contact your EBARA distributor or EBARA.
Pump Dimensions
See Figure 1 for the approximate physical dimensions of this pump.
EFQT-3 OUTLINE DRAWING
Figure 1 – Pump Model EFQT-3
15,51
(394,0)
7,75
(197,0)
8,50
(216,0)
17,00
(432,0)
25,82
(656,0)
24,50
(622,5)
7,32
(186,0)
4,01
(102,0)
2,99
(76,0)
17,00
(432,0)
8,81
(224,0)
7,50
(190,5)
1,50 DIA
(38,1)
DIMENSIONS:
INCHES
(MILIMETERS)
5,98
152,5
11,18
284,0
0,38[9,6] x 0,19[4,8]
x 3,50[88,9]