Autostart AS-6070 TW User Manual
Page 4
The functions of the transmitter are as follows:
LCD Remote Functions
The Transmitter offers several command-confirmation and timer features. This
section explains some of the key functions available on the Remote Control. Next
section gives a summary of the button combinations used to access the functions
(see LCD Remote Operation Tables).
Note:
If you wish to exit a function while still in the process of accessing it, simply stop and wait for at
least 10 seconds: the Remote Control will return to its normal state.
Basic Vehicle Operation
The vehicle can be remote-started and stopped using the
START/STOP
(
) button. The
TRUNK
(
) button will open the Trunk (if this feature is installed on the vehicle). The
LOCK
(
) and
UNLOCK
(
) buttons will lock and unlock the Doors of the vehicle (if the Remote
Door Lock feature is installed on the vehicle) and arm or disarm the Starter Kill (if installed).
The
FUNCTION
(
) button is used to access all advanced functions of the Remote Control.
(Refer to the LCD Operation and Confirmations tables.)
Alarm Clock
The LCD Remote Control has a built-in Alarm Clock which can be set up using the
but-
ton. Use the
and
buttons to switch the Alarm Clock on and off (refer to the tables).
Time Adjust Mode
Use Time Adjust Mode to set the current time on your Remote Control using the
button
(refer to the tables).
P. 4
User Guide
AS-6070 TW