Avaya NN43112-101 - Manual (Page 307)

Advanced features
307
use only the primary user login password to enable the password–
protected screensaver.
After the screensaver is activated, if the IP Deskphone is idle for the
defined delay/time interval, the screensaver takes control of the
IP Deskphone.
Figure 62 on page 307 displays the screen with locked
screen.
Figure 62: Screensaver locked screen
The following option is available for the Enable (with password) mode:
• Unlock —if the screensaver is not password protected, this key press
(or any other) cancels the screensaver. If the screensaver is in a
password–protected mode, pressing the
Unlock context-sensitive
soft key invokes a password input screen. The password must be
correctly entered to cancel the screensaver.
If you enable the screensaver with no password mode:
• Any user interaction, key presses, mouse movement, or incoming call
cancels the screensaver (without requiring a user password). This
includes pressing the
Unlock context-sensitive soft key.
• Incoming IMs do not cancel the screensaver.
• The programmed keys of attached Expansion Module(s) are cleared
until the screensaver is deactivated. If you have logged on to the
IP Deskphone, you are not logged out, but the line key labels clear
and are inactive until the screensaver is deactivated.
If you reboot the IP Deskphone when there is an active screensaver:
• If you have enabled autologin, then the screensaver remains active
after the IP Deskphone reboots and completes the login.