Sangean MMC-96i RS - Manual (Page 21)

20
GB
Inactive brightness control
The brightness of the display when the unit is in switch-on mode may
be adjusted. If you use the unit in the bedroom, you may prefer a lower
standby brightness level than the standard setting.
1. Press the On / Standby button to switch on the cradle.
2. Press and hold the Menu button so that the display shows
“Set Brightness” on the lower line of the text display.
3. Press and release the Select button to show the current setting.
4. Press and release the Fast-forward or Rewind buttons to change the
inactive brightness level. The backlight level will change at the same
time so that you can see the effect of the change.
5. Press and release the Select button to save the new setting.
The default setting after a system reset is 5. Possible brightness values
range from 1 - 7.