eLine Technology EPTZ-27IR User Manual - Manual (Page 5)

Operation Manual of P T Z Dome Camera
4
Chapter 1 Product Overview
1.1 Performance Instructions
¾ Address of Dome device is from 0～255. The number (address) of dome device in
the control system is setup by the hardware (8-digit on and off switch) of dome
device.
¾ Integrated multi-protocol and auto protocol differentiation. Note: The dome device
only auto differentiate controller of the first communication.
¾ Pan 360 degree continuous scanning.
¾ Tilt 90 degree action plus 2 degree angle adjustment. Plus the 2 degree
adjustment, the view angle can be 90 or 92 degree.
¾ Pan manual operation speed can be 0.1 to 150 degree per second.
¾ Tilt manual operation speed can be 0.1 to 55 degree per second.
¾ 128 preset positions.(A fixed position that aimed by the dome camera, which can
be set and revised by user arbitrarily)
¾ The maximum running speed when preset position is being called can reach 240
degree per second with accuracy of ±0.1 degree.
¾ Compatible with many kinds of Module Camera.(Sony, Hitachi, Sanyo, Yoke, CNB,
LG, Haitron, Samsung, Dahua)
¾ Power supply: AC 24V/3A.
¾ Easy installation interface.
¾ Pass environmental protection grade IP66 (outdoor type).
¾ Adopts long distance RS-485 transmission mode.
Transmission speed, i.e. Baud rate is selectable. (2400bps/4800bps/9600bps
/19200bps).
1.2 Feature Functions Instruction
¾ English operation menu and function display.
¾ Camera name and operation position and angle display.(The name of the camera
can be edited and the coordinate angle of the dome device can be displayed on the