eLine Technology EYS-VMS eyStream Quick Start - Manual (Page 9)

9
Launch of this configuration wizard is followed by auto search of connected IP devices. Found
devices are displayed in Select devices for activation list.
Set checkboxes next to those devices that should be registered as EyStream software objects in
Select devices for activation list. Click Apply.
Click Search to start the IP devices search again.
After clicking the Apply button the user will be suggested to configure archives on default for
video cameras (IP devices) selected at the first step.
Archive files of specified size will be created on all selected disks when archives are created
throught the IP device configuration wizard. These files will be logically combined into one archive
to which records from all video cameras configured throught this wizard will be stored.
Attention!
It is not recommended to specify the File value of the Type section parameter
when archives are created. Select the Logic disk value for this parameter. It is
possible to do only throught the EyStream software interface (see The
EyStream Software Package. User Guide, Archive creation with required
parameters chapter)
Procedure for Configuring System Objects
System objects form the basis for configuring the EyStream software package; you can set them up
using the Settings menu.