eLine Technology SNI-4G QuickSetup - Manual

eLineTechnology.com/support/documents Support 303.938.1133
Technical Support Knowledge Base
Sniper 4G Camera – Quick Setup
Connect camera to network using network cable
1. Run CD included with the camera
2. Install Cam_Setup.exe
Network Configuration
1. Click on the camera in the camera list to bring
up an image
2. Click on 3G
3. Type in SIM Card information
APN: BROADBAND
TEL NO. : *99***3# OR *99***1#
Leave account and password blank
4. Click SAVE
Camera is online when NET STATE shows
connected.
If camera does not establish connection, below are
2 other options to try.
APN : WAP.CINGULAR
TEL NO. : *99***1#
*99***3#
APN: ISP.CINGULAR
TEL NO. : *99***1#
*99***3#