eLine Technology SIP Web Browser Guide v1.0 - Manual (Page 15)

IPWEB Guide
-14-
2.7 Alarm configuration
Alarm configuration, including alarm I/O port configuration, Disk warning, I/O alarm linkage, and
motion detection alarm.
2.7.1 Alarm I/O Parameter Configuration
A larm input: Select the alarm input configuration ID, the alarm can be chose the effective level.
Effective level include: high and low two options. When you select high effective input port when access
to high level alarm that is triggered by alarm signals, When you select low effective input port when the
alarm signal that is triggered off high alert.
Alarm output: Select the alarm output configuration ID, the effective signal, alarm mode and alarm
output timing parameters.
Effectively including closed and disconnects signals two options: Alarm output model, including
switch-mode and square-wave mode, When the choice of square-wave mode, can fill in the frequency of
square-wave output, unit is Hertz.
Note: the unit of Alarm Time is millisecond.
eLineTechnology.com