eLine Technology SIP-ED-R - Manual (Page 8)

5 6
Connection
3. CAMERA INSTALLATION
Make sure to follow the correct polarity if connecting
the camera to DC power. Polarity is marked on the
power connector.
1. Use the included allen key to
remove make lose the top 1
camera will simple be removed
away from the base part.
2. Use the included mounting
template or the camera base 2
plate to mark holes for the four
mounting screws.
Mounting Screw Hole
Mounting Screw Hole
3. Mount the camera to the
surface using the included
mounting screws (4x).
3
4. Now refit camera into base
Adjust position as needed
5. (Optional) Insert a microSD
card into the camera. To
enable recording, you must
format the microSD card and
configure microSD
recording. For details, see
“6.9.1 Record Directory” on
page 36.
sdCard access is behind
panel on camera
NOTE: The camera supports
microSD cards up to a
maximum size of 64GB.
SanDisk™ or Kingston™ brand
microSD cards are
recommended.
eLineTechnology