Emtek Toilet Paper Holder Bar Style - Manual

Toilet Paper Holder - Installation Instructions
Mark three hole locations for the
mounting plate. 1
2
4 Slip trim plate over the threaded stud on the
mounting plate. Thread TP Holder onto the
threaded stud until tight against trim plate.
Shape of trim
plate varies
depending on
style.
Use a screw driver to install three Screw Anchors into the wall.
Install mounting plate on top of the Screw Anchors. Attach
with sheet metal screws provided.
3 Tighten set screw at base of post with allen
wrench provided. Holder may be mounted
vertically or horizontally.
IN4-TOLPAPHRBAR REV. 11/16/04
Screw
Anchors Installed Screw
Anchors