Emtek Toilet Paper Holder Spring Rod Style - Manual

Toilet Paper Holder with Spring Rod - Installation Instructions
Mark three hole locations for mounting plate.
6”
Make two marks on wall to locate center of
mounting plates. Center to center spacing
for mounting plates is 6 inches.
1 2
Use a screw driver to install three Screw Anchors
into the wall for each mounting plate. Install
mounting plates on top of the Screw Anchors.
Attach with the sheet metal screws provided.
3 4 Slip trim plates and posts over the mounting
plate stud. Tighten set screw at the base of each
post with the allen wrench provided.
Shape of trim
plate varies
depending on
style.
IN4-TOLPAPHRSNG REV. 11/16/04
Screw Anchors
Installed
Screw Anchors