Emtek Brass & Lost Wax 8-Inch Pulls on Pull Plates - Manual

Tighten Screws
Installation Instructions-8” Brass & Tuscany Door Pulls and Plates.
IN4-DOORPULL8 REV. 11/17/08
Install Thru Bolts
Note: Threaded Insert pairs are provided
With 8-32 & 1/4-20 internal threads to
Be used with corresponding screw size.
Use flat head screwdriver to install
3/8-16 threaded inserts (provided)
Flush to Handle.
Exploded View
Plate & Handle style
Will vary with model.
Install Insert Screws
Use #2 Phillips screwdriver to fasten
Plate to Handle using #8-32 or 1/4-20
machine screws (provided).
Position Door Pull on door and
Secure with wood screws (provided).