Emtek Brass & Lost Wax 12-Inch Pulls - Manual

Door Preparation
IN4-DOORPULL12 01-06-09
Installation Instructions –12” Center to Center Door Pulls.
Handle style Will vary with model.
Install Thru Bolts & Caps
Note: Threaded Insert adapters are provided
With 8-32 & 1/4-20 internal threads to
Be used with corresponding screw size.
Use flat head screwdriver to install
3/8-16 threaded inserts (provided)
Flush to Handle.
Exploded View
Hand tighten Decorative Cap over
threaded washer (provided).
Position Door Pull on door and Secure with
#10 wood screws (provided) from the oppo-
site side. Use #2 Phillips screwdriver.
Install Threaded Adapters
Drill two 3/16” or larger holes
12” apart on center thru door.