Emtek Door Knocker-S Style - Manual

Hole Template
Knocker Installation
Knocker Installation
Tighten Screws
Installation Instructions-Door Knocker - S Style - 2622
IN4-DOORKNKR3 REV. 12/20/06
5/16” Drill Bit
Countersunk Washers
Hole Template
5/16” Drill Hole
Install Thru Bolts
Thread Thru Bolts (Provided)
onto Knocker & Strikeplate
Set Screws. Use Pliers to
Ensure that Bolts are Secure.
Thru Bolts
4-
7/8”
Drill Holes In Door
Using Hole Template (Bottom of
This Page) Drill Two Holes with a
5/16” Drill Bit.
Emtek Products, Inc.
4-7/8”
Strikeplate
Set Screws
Strikeplate
5/16” Drill Hole
Knocker