Emtek CF Mechanism Passage & Privacy Locksets - Manual

CF Mechanism
Passage & Privacy Locksets
Installation Guide
What’s in the Box
ASSA ABLOY, the global leader in door opening solutions
ITEM NO. DESCRIPTION QTY.
1
1
1
2
1
1
1
1
1
4
1
1
1
1
Pre-Assembled Trim
Plastic Alignment Tool
Concealed Fastener Mechanism
#8-32 x 1” Flat Head Machine Screws
Rosette
Privacy Pin
Ring Fastener
Plastic Washer
Interior/Exterior Knob or Lever
#8 x 3/4” Wood Screws
Latch
Strike Plate
Plastic Ring Fastener Wrench
3/32” Allen Wrench ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs
for security, safety and convenience.
Copyright © 2013, Emtek Products, Inc. an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Emtek Products, Inc.
is prohibited.
Step 6: Secure rosette to door with Ring Fastener H using Plastic
Ring Fastener Wrench N.
Step 8: A. Tighten the pre-installed set screw in knob or lever with
3/32” Allen Wrench O. B. Screw Privacy Pin G through interior trim
into latch.
Check trim alignment before fully tightening
Ring Fastener.
Step 7: A. Place Plastic Washer I on to Knob or Lever J. B.Then
install Knob or Lever J by sliding it on to the spindle.
A
B
Privacy Pin G
Plastic Ring
Fastener
Wrench N
Ring Fastener H
Plastic Washer I
B
A
How to Install
5. Install Trims (Continued)
!