American Dryer Corp. ML-55 - Manual (Page 29)

450564 - 3 www.amdry.com 29
Hot Surface Ignition Burner Assembly
Illus. No. Part No. Qty. Description
1 318403 1 Hot Surface Ignition Burner Shield
2 881597 1 Hot Surface Ignitor – 24 VAC (2-1/2” length)
3 128921 1 Hot Surface Ignition Flame Sensor
4 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
5 141105 3 Large Burner Tube
6 150103 1 #8-32 x 1/2” Phillips Round Head Machine Screw
7 153000 1 #8 Steel Burr
8 151001 1 #8-32 Pal Nut
9* 140820 3 #29 Natural Gas Orifice
140804 3 #48 Liquid Propane Gas Orifice
10 141232 1 3-Port Manifold
11 318700 1 Pipe Bracket
12 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
13 128927 1 1/2” 24 VAC Redundant (natural gas) Gas Valve
880960 1 1/2” 24 VAC (liquid propane gas) Gas Valve Assembly
14 318712 2 GV Pipe Bracket
15 150309 2 #10-32 x 1/2” Hex Head TEK Crimptite Screw
16 142707 1 1/2” x 1-1/2” Black Iron Nipple
17 142506 1 1/2” Street Elbow
18 142600 1 1/2” Union
19 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw
20 810029 1 Hot Surface Ignition Module Bracket Assembly
21 881797 1 Hot Surface Ignition Module II
22 151001 2 #8-32 Pal Nut
—* 881598 1 Hot Surface Ignition Liquid Propane Conversion Kit
23 142809 1 1/2” x 29-1/8” Pipe
24 809712** 1 Natural Gas Burner Assembly
(includes illus. nos. 1 through 8 and 10 through 24)
809713 1 Liquid Propane Assembly
(includes illus. nos. 1 through 8 and 10 through 24)
850843 1 Hot Surface Ignition Burner Box ONLY
* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.