EXP Computer CD Station - Manual (Page 13)

- 14 -
Windows 95 (Older Versions)
The following dialog will appear. If you are using the PCMCIA CD-ROM
under Windows 95 for the very first time and your Windows 95 is version
4.00.950 or 4.00.950a.
(If this dialog box does not appear and the CD-ROM folder cannot be found
in My Computer, please refer to the section titled “Installing 32-bit Card
Support”.)
Select Driver from disk provided by hardware manufacturer and then
click the OK button. Windows 95 will then prompt you to insert the
manufacture’s installation disk. Insert the PCMCIA CD-ROM device driver
disk into your floppy drive. Specify the directory as A:\ (or A:\ win95) and
click OK. All the remaining installations will then finish automatically.
Please note that it is not necessary to connect the PCMCIA CD-ROM every
time you reboot your computer; connect it only when you need to use it.