Rear panel, Power source, Caution – EXP Computer DVD Station User Manual
Page 8
- 9 -
REAR PANEL
1. Power Button:
Press the button to manually power on/off the drive when the AC adapter
powers it.
2. DC in Jack:
Connect the AC adapter here.
3. PCMCIA Interface Connector:
Connect the drive to the PCMCIA interface card.
4. Audio Line-Out Jack:
Sends an audio signal to an external amplifier.
Figure 2
POWER SOURCE
An AC adapter powers the DVD-ROM drive. The POWER LED indicates
the power status, which will always light up when the power supply is in the
normal condition.
1.
Connect the AC adapter into the DC IN jack at the rear panel of the
DVD-ROM drive.
2.
Plug the AC adapter into the AC power outlet.
3.
Insert the PCMCIA card. Now the DVD-ROM drive is ready to go.
CAUTION
Use only the AC adapter that is provided with this unit. Using a different
AC adapter may cause serious and permanent damage to the DVD-ROM
drive.