EXP Computer EXP CD-Rewriter Bundled S_W - Manual (Page 26)

3-4
Adaptec Easy CD Creator Standard Edition
Adaptec Easy CD Creator Standard Edition
Stock Number: 511446-00, Rev. A
Page: 3-4
Print Spec Number: 496513-00 Inside Text: 496512-00
Current Date: 5/8/98 Final Review
6 Repeat steps 3-5 for each existing music CD from which you
want to record songs.
7 Select Create CD from the File menu when you have placed all
of the songs that you want to record into the Audio CD Layout
window.
The CD Creation Setup box appears.
8 Make changes, if any, to the CD Creation Setup settings (see
CD Creation Setup Settings on page B-1 for descriptions) and
click OK.
Easy CD Creator begins recording your CD layout to a blank CD.
Insert a blank CD when prompted.
When the CD is finished, a final message box appears notifying you
that the recording is complete.
Note: To make a sleeve that lists the artist, CD title, and
songs, see Chapter 10, Making a Custom Jewel Case Insert.
Recording Wave Files Stored on Your Hard Drive
To record an audio CD using Wave files (*. wav ), the Wave files must
be stored on your hard drive at 11, 22, 44.1 KHz, 8- or 16-bit, mono
or stereo. To make a Wave file from an existing CD, see Pre-recording
Audio Tracks to Wave Files on page 3-5.
To record Wave files stored on your hard drive to a blank CD, follow
these steps:
1 Insert a blank CD into your CD recorder.
2 Select New CD Layout from the File menu or open an existing
layout.
3 Click the Audio CD Layout tab.
4 Select the Wave files you want to record from Explorer and
drag them to the Audio CD Layout window.
To change the name of the song(s) see Renaming Songs in Your
CD Layout on page 3-7.