Abocom WB2000 - Manual (Page 9)

- 7 -
Item Description
Status It displays the information about the
status of the communication (the
BSSID of the Access Point to which
the card is associated).
SSID The SSID is the unique name shared
among all points in your wireless
network. The name must be identical
for all devices and points attempting
to connect to the same network.
It shows the current SSID setting of
the Wireless Network Adapter.
Tx Rate It shows the current transfer rate. (1,
2, 5.5, or 11Mbps or Auto)
Channel It shows the selected channel that is
currently used. (There are 14
channels available, depends on the
country.)
Link Quality It displays the link quality of the
connection between the Wireless
Network Adapter and the Access
Point it connects.
Signal
Strength
It displays the signal strength of the
connection between the Wireless
Network Adapter and the Access
Point it connects.
Data Rate It displays the current transmitting
and receiving rate.
Configuration
You can change advanced configuration settings,
such as the SSID, Operation Mode, Tx Rate
and Preamble Type.