Apacer Technology AP-SRFD255AXXXXR-G - Manual (Page 7)

Serial ATA Flash Drive
AP-SRFD255AXXXXR-G
7
© 2008 Apacer Technology Inc. Rev 0.2 (Preliminary)
1.4 LED Mode
The following table shows LED Mode status and descriptions.
Table 1-2: LED Status
H/D Signal Color Indication Description
D1 Red SATA Link SATA Link ready
Host
D2 Green Read/Write Host/device Access (active)
D3 Yellow LED_D0_N1
CF 1
D4 Green LED_D0_N0
See table as below
D5 Yellow LED_D1_N1
CF 2
D6 Green LED_D1_N0
See table as below
Table 1-3: CF 1 and CF 2 LED
Description
LED_Dx_N1
(D3/D5)
LED_Dx_N0
(D4/D6)
Device Unplugged / No Power Blink Blink
Device Plugged (Idle) On Off
Device Plugged (Activity) On Flash (On)
Disk Rebuild (A Physical Partition is being Rebuilt; Safe
Mode (RAID-1))
Blink On
Disk Rebuild-Verify (A Physical Partition is being Verified;
Safe Mode (RAID-1))
On
Flash (ON)
Will appear as On
Error State: Incorrect Serial Number Blink Blink